Why Choose Redodo Trolling Motor Batteries?

Redodo trolling motor batteries stand out for their LiFePO4 chemistry, offering 4000–15000 deep cycles and 10+ year lifespans—outperforming lead-acid by 3–5x. Built with 100A BMS and Grade-A cells, they handle marine demands through low-temperature protection (-4°F to 140°F), scalable configurations (up to 48V 400Ah), and high energy density (1280Wh). Their compact designs fit tight spaces while delivering 2560W peak power for sustained trolling motor operation.

How does Redodo achieve 10+ year lifespans?

Redodo leverages Grade-A LiFePO4 cells and adaptive 100A battery management systems (BMS) to minimize degradation. The BMS regulates voltage spikes, cell balancing, and temperature extremes. Pro Tip: Store batteries at 50–70% charge during offseason to maximize cycle counts. For example, operating daily at 60% depth of discharge (DOD) extends cycles to 15,000—equivalent to 40 years of weekend boating use.

Beyond raw cell quality, Redodo optimizes cycle life through charge protocols. Their BMS terminates charging at 14.6V (for 12V models) with ±0.05V precision, preventing overcharge stress. Thermal throttling reduces current by 50% when ambient temperatures exceed 122°F—a common issue in engine compartments. Could traditional lead-acid survive this? Unlikely, given their 80% capacity drop after 500 cycles.

What scalability options exist?

Redodo supports 4S4P configurations for 48V systems, achieving 400Ah capacity via M8 terminals. Parallel connections require matching voltage (±0.1V) and state of charge (SOC) (±5%). For instance, wiring four 12V 100Ah batteries in series creates a 48V bank powering high-thrust trolling motors up to 112 lbs. Pro Tip: Use Bluetooth-enabled models (available in select SKUs) to monitor individual battery SOC via the Redodo app.

Transitioning from 12V to 24V/48V setups reduces current draw by 50–75%, minimizing voltage drop over long cable runs. Boats needing 5+ hours of runtime at 30A load should opt for 24V 200Ah banks. Remember: Scalability isn’t just about capacity. Redodo’s BMS coordinates charge/discharge across all batteries, ensuring balanced workloads. What’s the alternative? Manual balancing every 10 cycles—a 45-minute task most anglers skip.

Why prioritize built-in 100A BMS?

The 100A BMS enables uninterrupted 1280W–2560W output, critical for battling currents or sudden motor startups. Traditional trolling batteries with 50A BMS units throttle power when demand spikes, leaving you underpowered. For example, Minn Kota Terrova 80 lbs thrust motors require 56A at 24V—Redodo’s 100A buffer prevents voltage sag during abrupt speed changes.

Practically speaking, the BMS also safeguards against common marine hazards. Saltwater corrosion on terminals? The system detects resistance spikes and limits current flow. Forgot to disconnect before launching? Reverse polarity protection isolates faults within 0.1 seconds. How does this compare? AGM batteries lack such protections, often leading to $400+ replacement costs after a single error.

ABKPower Expert Insight

FAQs